Piederumi ūdens dzesētājiem (Radiatori, Kontrolieri u.c.)

Bitspower Sealing Ring Set BP-WTP-O50-BK

Saņem 31.07.
490
Juridiskām personām: 4.05 €

Piegādes veidi:

SELF_DELIVERY

Saņem 1a.lv klientu centrā
31.07.2019

PICKUP

Saņem piegādes punktos
31.07.2019

ADDRESS

Saņem piegādi uz adresi
31.07.2019

Preces galvenie parametri:

  • Preces tips: Komplekti
  • Pielietojums: Dzesēšanas sistēmai
gift-icon

Dāvana:

gift-icon

Izvēlies datoru komponentes, mēs datoru saliksim BEZ MAKSAS!!!

van-icon

Bezmaksas piegāde uz "K-Senukai"!

Detalizēta informācija

RažotājsBitsPower
Preces tipsKomplekti
PielietojumsDzesēšanas sistēmai
SpecifikācijaFor: G1 / 4 inch external thread
Content: about 50 pieces

Preces apraksts

Preces apraksts angļu valodā:


Water and electronics are not known to be compatible. To ensure that the separation between the two areas remains 100%, even with beloved water cooling, the sealing rings at the connections should be changed regularly. 

Although they have a long life, similar to vehicle tires, they lose their elasticity over time and become brittle. What leads to reduced grip on the road and provokes accidents in case of doubt, can also cause problems for the Wakü if a system becomes leaky. 

In addition to the contact of the water with the electronics, especially the sinking water pressure, the higher volume due to air inside the system and, in case of doubt, the total failure of the cooling are a considerable risk for the expensive hardware. 

With this set of many O-shaped sealing rings even extensive systems can be retreaded. The inner diameter requires use for G1 / 4 inch external thread. These are the most common thread standard, so that with few exceptions almost all screw threads can be sealed. Take care! 

Technical details:
  • Material: rubber
  • For: G1 / 4 inch external thread
  • Content: about 50 pieces

Atsauksmes

Vērtēt iespējams reģistrētiem klientiem, kuri izdarījuši kaut vienu veiksmīgu pirkumu

BitsPower Bitspower Sealing Ring Set BP-WTP-O50-BK Preces apraksts angļu valodā:


Water and electronics are not known to be compatible. To ensure that the separation between the two areas remains 100%, even with beloved water cooling, the sealing rings at the connections should be changed regularly. 

Although they have a long life, similar to vehicle tires, they lose their elasticity over time and become brittle. What leads to reduced grip on the road and provokes accidents in case of doubt, can also cause problems for the Wakü if a system becomes leaky. 

In addition to the contact of the water with the electronics, especially the sinking water pressure, the higher volume due to air inside the system and, in case of doubt, the total failure of the cooling are a considerable risk for the expensive hardware. 

With this set of many O-shaped sealing rings even extensive systems can be retreaded. The inner diameter requires use for G1 / 4 inch external thread. These are the most common thread standard, so that with few exceptions almost all screw threads can be sealed. Take care! 

Technical details:
  • Material: rubber
  • For: G1 / 4 inch external thread
  • Content: about 50 pieces
BP-WTP-O50-BK 4.90

Rekomendējam Tev

Tev varētu interesēt:

Uz augšu