Piederumi ūdens dzesētājiem (Radiatori, Kontrolieri u.c.)

Aqua Computer Aqualis XT 450 ml

Saņem 31.10.
10690
Juridiskām personām: 88.35 €

Piegādes veidi:

SELF_DELIVERY

Saņem 1a.lv klientu centrā
31.10.2019

PICKUP

Saņem piegādes punktos
01.11.2019

ADDRESS

Saņem piegādi uz adresi
01.11.2019

Preces galvenie parametri:

  • Preces tips: Rezervuāri
  • Pielietojums: Dzesēšanas sistēmai
gift-icon

Dāvana:

gift-icon

Saliksim datoru BEZ MAKSAS, ja izvēlētās komponentes veido darbam pilnvērtīgu datoru!

van-icon

Bezmaksas piegāde uz "K-Senukai"!

van-icon

Bezmaksas piegāde 1A klientu centrā!

Detalizēta informācija

RažotājsAqua Computer
Preces tipsRezervuāri
PielietojumsDzesēšanas sistēmai
SpecifikācijaIzmēri bez sūkņa: apm. 80 x 80 x 200 mm
Savienojuma diametrs: G1/4
Uzpildīšanas tilpums: apm. 450 ml

Preces apraksts

Preces apraksts angļu valodā:


The aqualis series reservoirs are equipped with a borosilicate glass tube which, unlike the acrylic glass commonly used for tube reservoirs, has very high hardness and scratch resistance, very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 75 mm and a wall thickness of 5 mm. The base and lid of the aqualis series are made of Delrin, the lid and bottom are connected by a nickel-plated brass tube. A visual highlight is the integrated water column effect. 

If the return line is connected to the central connection of the aqualis, the water flows through the central brass tube to the cover and exits through eight openings, which is a real eye-catcher especially in connection with lighting. A thin acrylic sheet close to the bottom of the aqualis minimizes air entry into the circuit. Alternatively, the return can be connected to a side port, the water then flows back from the ground into the surge tank. For this configuration, a baffle is included, which in turn ensures good ventilation of the circuit. 

The aqualis XT variants also have an acrylic glass window integrated into the floor and can accommodate up to six LEDs and are also equipped with electronic level measurement with USB and aquabus interface, a configurable alarm output and an external temperature sensor input. For monitoring and configuration the software aquasuite is available for download. The four-pin aquabus interface also allows direct connection to an aquaero 5 controller (not included). 

The alarm output can either be configured as an artificial tacho signal for connection to a fan output with tacho signal evaluation (eg of the mainboard) or as a switching output, for example for switching an LED in the event of an alarm. For alarm monitoring, in addition to the measured level, the external temperature sensor input is also available. The external temperature sensor input is compatible with all temperature sensors offered by Aqua Computer. 

Technical details:
  • Dimensions: 80 x 80 x 200 mm (W x H x D)
  • Weight: about 400 grams
  • Scope of delivery: 
    One expansion tank 
    One screw plug G1 / 4 (pre-assembled) 
    One internal USB connection cable 
    One stainless steel 
    bracket One baffle plate made of stainless steel 
    Mounting material

Līzinga kalkulators

Ikmēneša maksājums: 5.27

Atsauksmes

Vērtēt iespējams reģistrētiem klientiem, kuri izdarījuši kaut vienu veiksmīgu pirkumu

Aqua Computer Aqua Computer Aqualis XT 450 ml Preces apraksts angļu valodā:


The aqualis series reservoirs are equipped with a borosilicate glass tube which, unlike the acrylic glass commonly used for tube reservoirs, has very high hardness and scratch resistance, very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 75 mm and a wall thickness of 5 mm. The base and lid of the aqualis series are made of Delrin, the lid and bottom are connected by a nickel-plated brass tube. A visual highlight is the integrated water column effect. 

If the return line is connected to the central connection of the aqualis, the water flows through the central brass tube to the cover and exits through eight openings, which is a real eye-catcher especially in connection with lighting. A thin acrylic sheet close to the bottom of the aqualis minimizes air entry into the circuit. Alternatively, the return can be connected to a side port, the water then flows back from the ground into the surge tank. For this configuration, a baffle is included, which in turn ensures good ventilation of the circuit. 

The aqualis XT variants also have an acrylic glass window integrated into the floor and can accommodate up to six LEDs and are also equipped with electronic level measurement with USB and aquabus interface, a configurable alarm output and an external temperature sensor input. For monitoring and configuration the software aquasuite is available for download. The four-pin aquabus interface also allows direct connection to an aquaero 5 controller (not included). 

The alarm output can either be configured as an artificial tacho signal for connection to a fan output with tacho signal evaluation (eg of the mainboard) or as a switching output, for example for switching an LED in the event of an alarm. For alarm monitoring, in addition to the measured level, the external temperature sensor input is also available. The external temperature sensor input is compatible with all temperature sensors offered by Aqua Computer. 

Technical details:
  • Dimensions: 80 x 80 x 200 mm (W x H x D)
  • Weight: about 400 grams
  • Scope of delivery: 
    One expansion tank 
    One screw plug G1 / 4 (pre-assembled) 
    One internal USB connection cable 
    One stainless steel 
    bracket One baffle plate made of stainless steel 
    Mounting material
106.90

Rekomendējam Tev

Tev varētu interesēt:

Uz augšu