The aqualis ECO series reservoirs are equipped with a borosilicate glass tube which, unlike the acrylic glass commonly used for tube reservoirs, has very high hardness and scratch resistance, very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 75 mm and a wall thickness of 5 mm. The base and lid of the aqualis series are made of Delrin, the lid and bottom are connected by a nickel-plated brass tube. A visual highlight is the integrated water column effect.
If the return line is connected to the central connection of the aqualis, the water flows through the central brass tube to the cover and exits through eight openings, which is a real eye-catcher especially in connection with lighting. A thin acrylic sheet close to the bottom of the aqualis minimizes air entry into the circuit. Alternatively, the return can be connected to a side port, the water then flows back from the ground into the surge tank. For this configuration, a baffle is included, which in turn ensures good ventilation of the circuit.
The aqualis PRO variants also have an acrylic glass window integrated in the floor and can accommodate up to six LEDs (type 5 mm / not included)) and is additionally prepared for retrofitting a level measurement. All 880 ml variants are also available with a nano-coating that simply lets water roll off the inside of the glass tube. In the present variant, this is the case and also provides a great visual effect.
- Dimensions: 80 x 300 x 80 mm (W x H x D)
- Filling volume: 880 ml
- Scope of supply:
A surge tank
Two screw plugs G1 / 4 (pre-assembled)
A stainless steel bracket
A baffle plate made of stainless steel