Korpusi

Zalman Case S2 Black

Saņem PIEKTDIEN
Ļoti POPULĀRA prece
3020
Juridiskām personām: 24.96 €

Piegādes veidi:

SELF_DELIVERY

Saņem 1a.lv klientu centrā
Piektdien (30.08) pēc 12:00

PICKUP

Saņem piegādes punktos
Piektdien (30.08) pēc 14:00

ADDRESS

Saņem piegādi uz adresi
Piektdien (30.08) pēc 18:00

Preces galvenie parametri:

  • Korpusa tips: ATX
  • Barošanas bloks: Nav
  • Krāsa: Melna
  • 5.25" Drive Bays: Nav
  • 3.5" Drive Bays: 2
  • 3.5" FDD Drive Bays: Nav
gift-icon

Dāvana:

gift-icon

Saliksim datoru BEZ MAKSAS, ja izvēlētās komponentes veido darbam pilnvērtīgu datoru!

van-icon

Bezmaksas piegāde uz "K-Senukai"!

van-icon

Bezmaksas piegāde ar Eksprespastu uz Circle-K!

van-icon

Bezmaksas piegāde ar Eksprespastu uz Latvijas Pastu!

Detalizēta informācija

KOPĒJIE PARAMETRI

RažotājsZalman
Korpusa tipsATX
Barošanas bloksNav
Korpusa materiālsPlastmasa
Tērauds
KrāsaMelna

PAPLAŠINĀJUMU IESPĒJAS

5.25" Drive BaysNav
3.5" Drive Bays2
3.5" FDD Drive BaysNav

PRIEKŠĒJĀ PANEĻA PIESLĒGUMI

Priekšējā paneļa interfeiss1 x Audio In
1 x Audio Out
1 x USB 3.0
2 x USB 2.0

IZMĒRI UN SVARS

Izmēri189 x 451 x 412 mm
Svars (kg)3.9

PAPILDUS

Īpašas atzīmesMātesplates saderība: ATX, Micro-ATX, Mini-ITX
Disku nodalījumi: 2x 2.5"
Paplašināšanas sloti: 7
Komplektā:
1 x 120mm dzesētājs (aizmugurē)

Preces apraksts

Preces apraksts angļu valodā:


The sophisticated S2 Midi Tower by Zalman is a low-priced housing from the new S-series and comes with a large side panel made of acrylic glass . A noble grid-look front with dust filter and the 120 mm fans pre-installed behind it ensure optimum airflow in the housing. There are further removable dust filters on the lid and on the bottom. Not least the power supply cover ensures a tidy interior, in which plenty of hardware space.


The Zalman S2 Midi Tower at a glance:

  • Attractive design with large tinted side panel made of acrylic glass
  • Three 120mm fans pre-installed
  • Well equipped I / O panel with 2x USB 2.0 & 1x 3.0 & audio in / out
  • Up to two SSDs / HDDs or a maximum of four SSDs
  • Removable dust filter & cable management & air permeable front panel
  • Graphics cards up to 330 mm in length & CPU cooler up to 156 mm in height
  • Room for up to a 240mm radiator or two 120mm radiators


The features of the Zalman S2 housing in detail

The attractive exterior of the Zalman S2 is completed by clever detail solutions inside. The case for a clean look has a power supply cover and enough space for cable management behind the motherboard tray. Up to two 3.5-inch hard drives or two 2.5-inch SSDs , which can be mounted without tools, find a home in an HDD cage behind the power supply. Two more SSDs can be attached to the back of the mainboard tray. 

Under the power supply cover can accommodate a power supply, which may be a maximum of 180 millimeters long. There are a total of six slots for cable management. These cables can be used for the total of three front-installable 120-millimeter fansbe moved. Two has already settled Zalman. A third one is preinstalled on the back of the case. Two more 120mm fans can be attached to the lid and top of the power supply cover. Instead of the fans can be mountedon the front of a 240-millimeter radiator and on the back of a smaller 120-millimeter fan . There are removable dust filters on the bottom and on the lid, while the stylish mesh front with mesh look is also equipped with a dust filter. 

The lush I / O panel, equipped with a USB 3.0 port and two USB 2.0 ports , is located on the front of the lid. Multiple up to 330mm long graphics cardscan be accommodated in this noble case and make the Z2 the optimal basis for a well-equipped gaming system. It also has a large recess in the mainboard tray for using large CPU coolers in combination with a backplate to allow for a particularly stable mounting of the processor cooler, which may be up to 156 millimeters high. 

Technical details:
  • Dimensions: 189 x 451 x 412 mm (WxHxD)
  • Material: steel, plastic, acrylic glass
  • Weight: about 4 kg
  • Color: Black
  • Form factor: ATX, Micro-ATX, Mini-ITX
  • Total possible fan: 
    3x 120 mm (front) 
    2x 120 mm (cover) 
    2x 120 mm (top of power supply cover ) 
    1x 120 mm (back)
  • Radiator mountings: 
    1x max. 240 mm (front) 
    1x max. 120 mm (back)
  • Dust filter (removable): front, bottom, front
  • Drives: 
    2x 3.5 / 2.5 inches (internal) 
    2x 2.5 inches (internal)
  • Power adapter (optional): Standard ATX
  • Expansion Slots: 7
  • I / O Panel: 
    1x USB 3.0 
    2x USB 2.0 
    1x per Audio In / Out
  • Maximum graphics card length: 330 mm
  • Maximum network part length: 180 mm
  • Maximum height CPU cooler: 156 mm

Atsauksmes

12345

4.6 no 5 zvaigznēm | Kopā 9 vērtējumi

5★

7

4★

2

3★

0

2★

0

1★

0

Vērtēt iespējams reģistrētiem klientiem, kuri izdarījuši kaut vienu veiksmīgu pirkumu

12345

Kristaps - 31.05.2019

Verificēts pirkums

Akrila plāksne ir tumšākā kā bildēs izskatās. Bez LEDiem, iekšā neko īsti neredz.

12345

Дима - 07.05.2019

Verificēts pirkums

Классный корпус, но жаль что акриловое стекло

12345

Anita - 21.01.2019

Verificēts pirkums

viss kartībā , prece bija laikā , paldies!

ZALMAN Zalman Case S2 Black Preces apraksts angļu valodā:


The sophisticated S2 Midi Tower by Zalman is a low-priced housing from the new S-series and comes with a large side panel made of acrylic glass . A noble grid-look front with dust filter and the 120 mm fans pre-installed behind it ensure optimum airflow in the housing. There are further removable dust filters on the lid and on the bottom. Not least the power supply cover ensures a tidy interior, in which plenty of hardware space.


The Zalman S2 Midi Tower at a glance:

  • Attractive design with large tinted side panel made of acrylic glass
  • Three 120mm fans pre-installed
  • Well equipped I / O panel with 2x USB 2.0 & 1x 3.0 & audio in / out
  • Up to two SSDs / HDDs or a maximum of four SSDs
  • Removable dust filter & cable management & air permeable front panel
  • Graphics cards up to 330 mm in length & CPU cooler up to 156 mm in height
  • Room for up to a 240mm radiator or two 120mm radiators


The features of the Zalman S2 housing in detail

The attractive exterior of the Zalman S2 is completed by clever detail solutions inside. The case for a clean look has a power supply cover and enough space for cable management behind the motherboard tray. Up to two 3.5-inch hard drives or two 2.5-inch SSDs , which can be mounted without tools, find a home in an HDD cage behind the power supply. Two more SSDs can be attached to the back of the mainboard tray. 

Under the power supply cover can accommodate a power supply, which may be a maximum of 180 millimeters long. There are a total of six slots for cable management. These cables can be used for the total of three front-installable 120-millimeter fansbe moved. Two has already settled Zalman. A third one is preinstalled on the back of the case. Two more 120mm fans can be attached to the lid and top of the power supply cover. Instead of the fans can be mountedon the front of a 240-millimeter radiator and on the back of a smaller 120-millimeter fan . There are removable dust filters on the bottom and on the lid, while the stylish mesh front with mesh look is also equipped with a dust filter. 

The lush I / O panel, equipped with a USB 3.0 port and two USB 2.0 ports , is located on the front of the lid. Multiple up to 330mm long graphics cardscan be accommodated in this noble case and make the Z2 the optimal basis for a well-equipped gaming system. It also has a large recess in the mainboard tray for using large CPU coolers in combination with a backplate to allow for a particularly stable mounting of the processor cooler, which may be up to 156 millimeters high. 

Technical details:
  • Dimensions: 189 x 451 x 412 mm (WxHxD)
  • Material: steel, plastic, acrylic glass
  • Weight: about 4 kg
  • Color: Black
  • Form factor: ATX, Micro-ATX, Mini-ITX
  • Total possible fan: 
    3x 120 mm (front) 
    2x 120 mm (cover) 
    2x 120 mm (top of power supply cover ) 
    1x 120 mm (back)
  • Radiator mountings: 
    1x max. 240 mm (front) 
    1x max. 120 mm (back)
  • Dust filter (removable): front, bottom, front
  • Drives: 
    2x 3.5 / 2.5 inches (internal) 
    2x 2.5 inches (internal)
  • Power adapter (optional): Standard ATX
  • Expansion Slots: 7
  • I / O Panel: 
    1x USB 3.0 
    2x USB 2.0 
    1x per Audio In / Out
  • Maximum graphics card length: 330 mm
  • Maximum network part length: 180 mm
  • Maximum height CPU cooler: 156 mm
S2_case 4.6 9 5 0.5 30.20

Rekomendējam Tev

Uz augšu