Pievienojies SMART NET un ietaupi! Pievienoties

Datora korpuss Phanteks, balta


Atvaino, šī prece šobrīd nav pieejama internetā. Taču piedāvājam pārskatīt citas šīs kategorijas preces – ticam, ka atradīsi līdzīgu preci.

Tāpat vari turpināt iepirkšanos, atgriežoties sākumlapā vai meklēšanas laukā ierakstot, kādu preci meklēji.
Informācija

Izstrādājuma īpašības

Kopējie parametri

Produkta veids Korpusi
Zīmols Phanteks
Korpusa izmērs
Norāda mātesplates formfaktora izmēra standartu.
Mid tower (ATX)
Materiāls Plastmasa, Tērauds
Krāsa Balta
Integrētais barošanas bloks (PSU)

Paplašinājumu iespējas

3.5 collas iedaļu skaits
Drive Bays ir vieta, kur datora korpusam pievienot aparatūru. Mūsdienās visbiežāk tiek izmantoti četri veidi Drive Bays formfaktori (izmērs)- 5.25 ", 3.5", 2.5" vai 1.8".
2

Priekšējā paneļa pieslēgumi

Savienojumi
Interfeiss ir līdzekļu un noteikumu kopa, kura nodrošina cilvēka, programmas un aparatūras savstarpējo mijiedarbību.
Apšvietimo valdiklis, USB 3.0

Izmēri un svars

Svars 7 kg

Papildus

Garantija 24 mēn
Papildus informācija Korpusa tips: Midi Tower. Mātesplates saderība: E-ATX (platums līdz 272 mm), ATX, Micro-ATX, Mini-ITX. Disku nodalījumi: 2x 2.5". Paplašināšanas sloti: 7
Preces apraksts angļu valodā:
The cases of the Eclipse Series P400 are aimed at beginners and also offer many interesting features for experienced PC enthusiasts. With a power button illuminated by RGB LEDs as well as an "ambient down light", an LED strip on the lower front that illuminates the surroundings of the Eclipse tower in ten selectable colors, the Dutch are setting their own colorful accents! The cases of the Eclipse P400 series are available in different colors, eg black, white or anthracite, and for every available color version there is a version with or without a window. In addition to the color and window variants, Eclipse enclosures are also available with factory-integrated housing insulation, which can be found under the name Eclipse P400S.
Midi-Tower by PHANTEKS with LED lighting & sophisticated look The white Eclipse P400S Midi-Tower from the PHANTEKS Eclipse series offered here convinces already visually with its clear lines and the noble, rather restrained design. The one-piece front panel gives the case a very noble look, which is further enhanced by the external LED lighting on the lower front. The "PHANTEKS" lettering under the lower air intake illuminated by the LEDs gives the Midi Tower that "certain something" and the slats on the upper front, which also serve ventilation, are a welcome contrast to the simplicity of the front panel.

At the edge between the front and the lid are the reset switch, the fan control and the LED control positioned in the notch between the lid and the upper air inlet in the front. In the middle of the front of the lid is the RGB LED backlit power button, while the two audio ports and the two USB 3.0 ports on the "front" panel are offset laterally to the right. The majority of the lid takes a large, removable dust filter, which acts like a large mesh grid and rests on a large ventilation grille. Insulated Midi Tower: Ideal for silent gaming PCs The Eclipse P400S Midi-Tower has been equipped by PHANTEKS but factory with noise reduction mats. Both side panels have been completely provided with insulation material, similar to the insulated front, only the lid is an exception here. For example, two quadratic 140 mm insulating plates are used on the lid, which are laid from above onto the ventilation grille. If one or both of the two fan slots are occupied by a fan, one or two square dust filters can be used instead of the insulation boards.
Media Enclosure for Gaming Graphics Cards & AiO Water Cooling Also, the interior of the white Eclipse P400S looks very noble thanks to the black paint and is divided by a power supply cover with perforated grid on the top in two parts. The PSU-Shroud also hides the two 90 ° -rotated drive bays, which allow a tool-free installation of two 3.5-inch HDDs on the right side, after removing the side panels attached by thumb-screws. Behind the motherboard tray, up to two SSDs can be mounted in Drop-N-Lock SSB brackets, leaving 25 mm space for cable management. Velcro cable fasteners make it easy to lay cables and rubberized bushings in the tray protect the cables used.

up to 395 mm long graphics cards and radiator mountings for AiO water cooling and custom water cooling. For example, the case in the back has built-in options for a 120mm fan or equivalent radiator, while the front can accommodate three 120mm fans or two 140mm fans. As an alternative to the front fans, 280 or 360 heat exchangers can be installed in the front. To install a 360 mm radiator , however, a cover in the PSU Shroud and the cages for the HDDs must be removed. In addition to the two pre-installed 120-mm fans , one in the front and one in the back, up to two 120 or 140 case fans can be mounted in the lid.

If you want to tame your processor with a regular CPU cooler, you can use a model that is up to 16 cm high, while a power supply up to 270 mm long can supply the power needed for the gaming system. The LED lighting is supplied via a 12 volt SATA cable and a 4-pin connector allows the LED lighting of the housing to be connected to an optional LED control or motherboard with a corresponding RGB connector. With the help of optional accessories, you can install up to four additional 3.5-inch disks at the expense of the maximum length of graphics cards and eliminating the need for a front-mounted radiator. Compatible with motherboards with ASUS Aura RGB Strip Headers and RGB LEDs Thanks to the ingenious PHANTEKS RGB LED adapter cable , ASUS motherboards with built-in ASUS Aura RGB LED lighting and other models with 12V GRB headers can be integrated with RGB (or extended or retrofitted with PHANTEKS RGB LED strips) RGB -LED lighting in PHANTEKS enclosures Enthoo Luxe, Enthoo Mini XL and Eclipse P400 (S) in all variants (Standard, Window, Insulated) and colors together. The trick here is that the Aura motherboard lighting can be controlled together with the respective housing lighting on the practical ASUS ROG Aura software, which the entire gaming PC is lit uniformly at will and can display the same LED effects.

Technical details:
  • Dimensions: 210 x 495 x 470 mm (W x H x D)
  • Weight: about 7.5 kg
  • Material: steel, plastic
  • Color white
  • Form factor: E-ATX (up to 272 mm width), ATX, Micro-ATX, Mini-ITX
  • Total possible fan:
    2x 140 / 3x 120 mm (front)
    2x 140/120 mm (cover)
    1x 120 mm (back)
  • Pre-installed:
    1x 120 mm (front)
    1x 120 mm (back)
  • Radiator mountings (partial waiver of HDD and / or fan slots):
    1x max. 280/360 mm (front)
    1x max. 120 mm (back)
  • Filter: front, power supply, cover (removable)
  • Drive bays:
    2x 2.5 inches (internal, tool-free mounting)
    2x 3.5 inches (internal, tool-free mounting)
  • Power supply: 1x standard ATX (optional)
  • Expansion Slots: 7
  • I / O panel:
    1x power button (with RGB LED)
    1x LED controller
    2x USB 3.0
    1x fan control (3-stage, for 2 fans)
    2x audio
  • Maximum graphics card length: 395 mm
  • Maximum CPU cooler height: 160 mm
  • Maximum power supply length: 270 mm
Preces krāsa var atšķirties no attēlā redzamās. Produkta apraksts ir vispārīgs, tajā ne vienmēr ir minētas visas produkta īpašības. Produktu cenas e-veikalā var atšķirties no cenām lielveikalos un servisa centros. Preču atlikums noliktavā un e-veikalā var atšķirties, tāpēc šādos gadījumos piegādes nosacījumi var atšķirties no tiem, kas norādīti pasūtījuma veikšanas brīdī un / vai nevarēsim izpildīt Tavu pasūtījumu vai tikai daļēji izpildīt (tādos gadījumos Pircējs tiek informēts nekavējoties).

Pamanīji kļūdu preces aprakstā, īpašību tabulā vai attēlu galerijā? Ziņo mums