Pievienojies SMART NET un ietaupi! Pievienoties

UPS sprieguma stabilizators APC, 600 W


Atvaino, šī prece šobrīd nav pieejama internetā. Taču piedāvājam pārskatīt citas šīs kategorijas preces – ticam, ka atradīsi līdzīgu preci.

Tāpat vari turpināt iepirkšanos, atgriežoties sākumlapā vai meklēšanas laukā ierakstot, kādu preci meklēji.
Informācija

Izstrādājuma īpašības

Produkta veids UPS sprieguma stabilizatori
Zīmols APC
Dziļums 43.9 cm
Platums 21.5 cm
Augstums 17.1 cm
Jauda 600 W
Jauda (VA)
V apzīmē spriegumu voltos, A - strāvu ampēros, savukārt nominālais efekts (W) apzīmē jaudu vatos. W = VA x PF (PF – jaudas koeficients). Tas apzīmē aktīvo jaudas apmēru, ko saņem maiņstrāvas patērētājs. Gandrīz visiem modeļiem tas ir 0,9. Perfektā gadījumā koeficients = 1 un W = VA.
1000
Akumulatora tips Svina skābes
Darbības ilgums pēc uzlādes 7 min
Uzlādes laiks 3 h
Darba temperatūra 0 - 40 °C
Darba mitrums 0 - 95 %
Ekrāns
Daļa ierīču aprīkotas ar displeju, kurā tiek attēloti nozīmīgākie parametri, tādējādi atvieglojot UPS lietošanu un uzstādīšanu.
Ieejas 1 x RJ11, 1 x USB, 1x IEC-320 C14
Izejas 8 x IEC 320 C13
Garantija 24 mēn
Papildus informācija Nominal Output Voltage: 230V. Output Voltage Distortion: Less than 5% at full load. Waveform type: Sine wave. Alarm configurable delays. Surge energy rating: 459Joules.
APC SMART-UPS C 1000VA
Preces apraksts angļu valodā:

Features:
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

High online efficiency
Reduces utlility costs, generates less heat.

Cold-start capable
Provides temporary battery power when the utility power is out.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Availability
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Manageability
Network manageable
Provides remote power management of the UPS over the network.

Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial Connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Serviceability
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Resettable circuit breakers
Enables a quick recovery from overload events.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Preces krāsa var atšķirties no attēlā redzamās. Produkta apraksts ir vispārīgs, tajā ne vienmēr ir minētas visas produkta īpašības. Produktu cenas e-veikalā var atšķirties no cenām lielveikalos un servisa centros. Preču atlikums noliktavā un e-veikalā var atšķirties, tāpēc šādos gadījumos piegādes nosacījumi var atšķirties no tiem, kas norādīti pasūtījuma veikšanas brīdī un / vai nevarēsim izpildīt Tavu pasūtījumu vai tikai daļēji izpildīt (tādos gadījumos Pircējs tiek informēts nekavējoties).

Pamanīji kļūdu preces aprakstā, īpašību tabulā vai attēlu galerijā? Ziņo mums